Vážení zákazníci, v utorok 13.10.2026 bude predajňa v Banskej Bystrici z technických príčin zatvorená.
Catalog

Drives for sliding gates

(67 products)
Posuvne

Choosing the Right Drive for a Sliding Gate

Electromechanical drives are the most common choice for sliding gates in residential and commercial properties. These drives are reliable, durable, and offer excellent value for money. Electromechanical drives are categorized by their power supply into AC (alternating current) and DC (direct current) motors, each with its own specific advantages and application areas.

Types of Electromechanical Drives:

1. Drives with AC Power Supply

AC drives use alternating current and are known for their stability and high torque. Thanks to the higher torque, they can effectively drive heavier gates, ensuring reliable operation even under demanding conditions.

  • Advantages: High torque, ideal for heavy and large gates, long lifespan.
  • Application: Suitable for commercial properties or gates with high weight where continuous and intensive operation is required.

2. Drives with DC Power Supply

DC drives use direct current, allowing them to operate efficiently with lower energy consumption and less heat generation. As a result, they can handle a higher number of opening and closing cycles, which is ideal for gates with high usage frequency.

  • Advantages: Low energy consumption, less heat generation, ability to handle a higher number of cycles, quiet operation.
  • Application: Suitable for residential gates or gates with higher usage frequency, where efficient and quiet operation is needed.

What to Consider When Choosing a Drive for Sliding Gates

Choosing the right drive for your sliding gate depends on several key factors:

  • Type of Gate: It’s important to consider whether it’s a cantilever gate or a rolling gate. Cantilever gates require a more powerful drive since they must overcome their own weight without support, while rolling gates are usually less demanding on the drive.
  • Wing Weight: The drive must be strong enough to handle the weight of your gate. For heavier gates, AC drives are more suitable, offering higher torque.
  • Wing Length: Longer gates require a stronger motor and may need a drive with higher power to ensure smooth movement.
  • Usage Intensity: If the gate is used frequently, such as in commercial or residential complexes, DC drives can be advantageous due to their lower heat generation and ability to handle a higher number of cycles.
  • Location of the Gate: Consider whether the gate is on flat ground or on a slope. Gates installed on a slope require a more powerful drive that can overcome gravitational resistance during opening or closing.

Take Advantage of Our Product Filtering System

On our website, you will find a wide range of drives for sliding gates. To find the right drive for your gate, we recommend using our clear filtering system. With the filters, you can easily select a drive based on the type of power supply, performance, wing weight, and other parameters. If you need further assistance with your selection, don’t hesitate to contact us.

Drive sets for sliding gates Drive sets for sliding gates
Drives for sliding gates Drives for sliding gates
Other Other
  • Flange for mounting the NKSL400 drive on a post.

    Flange for mounting the NKSL400 drive on a post. NAKED-KIT

    Mark
    Rollkit
    Out of stock
    €21,69
    without VAT
    €26,68 with VAT
    Backordered
    PCS
    Related products
    Technical info
    Non-reversible electromechanical drive Non-reversible electromechanical drive

    Non-reversible electromechanical drive NKSL400

    Mark
    Nice
    Max. wing length
    6m
    Module of the gear comb
    mod 4
    €341,00
    without VAT
    €419,43 with VAT
    Low stock (11 units)
    PCS
  • Gear wheel for hydraulic brake mod. 6

    Gear wheel for hydraulic brake mod. 6 GEAR-M6

    Mark
    Rollkit
    €66,55
    without VAT
    €81,86 with VAT
    Very low stock (2 units)
    PCS
    Related products
    Braking Device for Gate Module 4

    Braking Device for Gate Module 4 BSFM-30

    Mark
    Rollkit
    €273,41
    without VAT
    €336,29 with VAT
    Very low stock (3 units)
    PCS
  • CAME complete kit - sliding gate 3500kg - 400V CAME complete kit - sliding gate 3500kg - 400V

    CAME complete kit - sliding gate 3500kg - 400V BY-3500-ZKIT

    Mark
    Came
    Recommended weight of the wing
    1750kg
    Module of the gear comb
    mod 6
    Out of stock
    €1.625,57
    without VAT
    €1.999,45 with VAT
    Backordered
    SET
    Related products
    Part of set
    External double-channel receiver - fixed code

    External double-channel receiver - fixed code MP/RX-F2

    Mark
    Rollkit
    €14,56
    without VAT
    €17,91 with VAT
    In stock (260 units)
    PCS
    Universal remote control 433MHz, 4CH, Rollkit

    Universal remote control 433MHz, 4CH, Rollkit FIX-FQ

    Mark
    Rollkit
    Frequency (MHz)
    433
    Code type
    Fix
    €6,88
    without VAT
    €8,46 with VAT
    In stock (6609 units)
    PCS
    Universal remote control 433/868Mhz, 4CH, fix/roll

    Universal remote control 433/868Mhz, 4CH, fix/roll MULTI-HERTZ

    Mark
    Rollkit
    Frequency (MHz)
    Multi (433/868)
    Code type
    Multi (fix/rolling)
    €15,52
    without VAT
    €19,09 with VAT
    In stock (836 units)
    PCS
    Came transmitter TOP 434-EV fixed code, 4CH
    Sale

    Came transmitter TOP 434-EV fixed code, 4CH TOP-434-EE

    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Fix
    Out of stock
    €23,23
    without VAT
    €28,57 with VAT
    Backordered
    PCS
    CAME antenna 433.9 MHz coaxial cable 5m CAME antenna 433.9 MHz coaxial cable 5m

    CAME antenna 433.9 MHz coaxial cable 5m TA-433-N

    Mark
    Came
    €14,93
    without VAT
    €18,36 with VAT
    In stock (302 units)
    PCS
    Double-channel external receiver 433,9MHz

    Double-channel external receiver 433,9MHz RE-432M

    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Multi (fix/rolling)
    €42,90
    without VAT
    €52,77 with VAT
    In stock (116 units)
    PCS
    Blinking light 230V

    Blinking light 230V KLED

    Mark
    Came
    €19,81
    without VAT
    €24,37 with VAT
    In stock (236 units)
    PCS
    Photocell for plaster montage max. 10m Photocell for plaster montage max. 10m

    Photocell for plaster montage max. 10m DIR-10

    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
    €34,11
    without VAT
    €41,96 with VAT
    In stock (584 units)
    PAIR
    Steel rack Zn, 30x30mm, L1m, max 5000kg Steel rack Zn, 30x30mm, L1m, max 5000kg

    Steel rack Zn, 30x30mm, L1m, max 5000kg H/01Fe-30x30H

    Material
    Steel
    Surface finish
    Galvanized
    Weight of gate Gmax/Goptimal (kg)
    5000
    €21,16
    without VAT
    €26,03 with VAT
    In stock (236 units)
    PCS
    Aut. motor with electronics max.3500kg, 400V, model 6 Aut. motor with electronics max.3500kg, 400V, model 6

    Aut. motor with electronics max.3500kg, 400V, model 6 BY-3500T-400V

    1 pcs
    Mark
    Came
    Recommended weight of the wing
    1750kg
    Module of the gear comb
    mod 6
    Radio card 433,9 MHz

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came
    Remote controller CAME TOP fix code, 2CH, CAME

    Remote controller CAME TOP fix code, 2CH, CAME TOP-432-EE

    1 pcs
    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Fix
    Photocell for plaster montage max. 10m Photocell for plaster montage max. 10m

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • CAME automation for sliding gates, set, max 2200kg CAME automation for sliding gates, set, max 2200kg

    CAME automation for sliding gates, set, max 2200kg BKS-2200-ZKIT

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 6
    €645,85
    without VAT
    €794,40 with VAT
    Low stock (10 units)
    SET
    Related products
    Part of set
    Universal stand for sliding gate drives

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    €36,71
    without VAT
    €45,15 with VAT
    In stock (366 units)
    PCS
    Automatic motor with electronics 1200kg Automatic motor with electronics 1200kg

    Automatic motor with electronics 1200kg BKS-2200

    1 pcs
    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 6
    Radio card 433,9 MHz

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came
    Remote controller CAME TOP rolling code, 4CH, CAME
    Sale

    Remote controller CAME TOP rolling code, 4CH, CAME TOPD4RBS

    2 pcs
    Mark
    Came
    Frequency (MHz)
    Multi (433/868)
    Code type
    Rolling
    Photocell for plaster montage max. 10m Photocell for plaster montage max. 10m

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • CAME automation for sliding gates, set, max 2200kg CAME automation for sliding gates, set, max 2200kg

    CAME automation for sliding gates, set, max 2200kg BKS-2200T-ZKIT

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 6
    €744,07
    without VAT
    €915,21 with VAT
    Very low stock (6 units)
    SET
    Related products
    Part of set
    Universal stand for sliding gate drives

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    €36,71
    without VAT
    €45,15 with VAT
    In stock (366 units)
    PCS
    CAME automation without electronics 2200kg - 400V CAME automation without electronics 2200kg - 400V

    CAME automation without electronics 2200kg - 400V BKS22TGS

    1 pcs
    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 6
    Guiding electronics CAME 400V

    Guiding electronics CAME 400V ZT-6

    1 pcs
    Mark
    Came
    Radio card 433,9 MHz

    Radio card 433,9 MHz AF-43-S

    1 pcs
    Mark
    Came
    Remote controller CAME TOP fix code, 2CH, CAME

    Remote controller CAME TOP fix code, 2CH, CAME TOP-432-EE

    1 pcs
    Mark
    Came
    Frequency (MHz)
    433
    Code type
    Fix
    Photocell for plaster montage max. 10m Photocell for plaster montage max. 10m

    Photocell for plaster montage max. 10m DIR-10

    1 pcs
    Mark
    Came
    Power supply
    12-24V AC
    Protection level
    IP54
  • Auto. motor do 2500 kg Auto. motor do 2500 kg

    Auto. motor do 2500 kg RUN-2500

    Mark
    Nice
    Recommended weight of the wing
    1250kg
    Drive slowdown
    Drive decelerate before endpoint
    €594,00
    without VAT
    €730,62 with VAT
    Low stock (15 units)
    PCS
    Related products
    Part of set
    Sets
    NICE drive for sliding gates, set, max 2500kg NICE drive for sliding gates, set, max 2500kg

    NICE drive for sliding gates, set, max 2500kg RUN2500-ZKIT

    Mark
    Nice
    Max. wing length
    18m
    Module of the gear comb
    mod 4
    €680,36
    without VAT
    €836,84 with VAT
    Low stock (15 units)
    SET
    Two-channel remote control NICE ERA-FLOR rolling c

    Two-channel remote control NICE ERA-FLOR rolling c FLO2RE

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    €14,95
    without VAT
    €18,39 with VAT
    In stock (5632 units)
    PCS
    Photocell for plaster montage - BLUEBUS do 30m

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44
    €34,56
    without VAT
    €42,51 with VAT
    In stock (504 units)
    PCS
    Receiver 4- canals NICE ONE

    Receiver 4- canals NICE ONE OXIBD

    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
    €36,85
    without VAT
    €45,33 with VAT
    In stock (292 units)
    PCS
    Control electronics for RUN 1800/2500

    Control electronics for RUN 1800/2500 RUA1

    1 pcs
    Mark
    Nice
  • CAME automation without electronics 2200kg - 400V CAME automation without electronics 2200kg - 400V

    CAME automation without electronics 2200kg - 400V BKS22TGS

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 6
    €440,00
    without VAT
    €541,20 with VAT
    Very low stock (6 units)
    PCS
    Related products
    Sets
    Technical info
    CAME automation for sliding gates, set, max 2200kg CAME automation for sliding gates, set, max 2200kg

    CAME automation for sliding gates, set, max 2200kg BKS-2200T-ZKIT

    Mark
    Came
    Max. wing length
    10m
    Module of the gear comb
    mod 6
    €744,07
    without VAT
    €915,21 with VAT
    Very low stock (6 units)
    SET
    Universal stand for sliding gate drives

    Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    €36,71
    without VAT
    €45,15 with VAT
    In stock (366 units)
    PCS

  • A tradition for over 30 years

  • Wide network of stores

  • Goods in stock

  • Fast delivery of goods in stock
Back to top